User Manual

IMPORTANT: Apply a thin coating of
RED threadlocker to the outside of the
bronze bushings. Use only a thin layer
to prevent contamination of the one-
way bearing inside the hub.
IMPORTANT: Remove and apply BLUE
threadlocker and do not overtighten
101-308 M3x8 Button Heads in the
main gear.
!
!
516-302
14x23x2mm Bronze Bushing
516-302
14x23x2mm Bronze Bushing
200-506
516 Auto Hub Assembly
516-381
181T Main Gear
101-308
M3x8 Button Head x4
108-111
One-way Bearing
PRE-INSTALLED BEARING
(DISASSEMBLY NOT REQUIRED)
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
05 | MAIN DRIVE
14
Rev 1.0M
MAIN GEAR AND AUTO HUB