User Manual

IMPORTANT: Remove bolts, pivot ball,
and apply BLUE threadlocker where
indicated.
IMPORTANT: Guide Pulley 516-405
with wall guides is the stationary pulley.
101-325
M3x25 Button Head Bolt
108-383
3x8x3 Radial Bearing
106-301
0.15mm Shim
101-316
M3x16 Button Head Bolt
107-110
Pivot Ball 2.5mm x 4.5mm
106-301
0.15mm Shim
516-221
Belt Tensioner Arm
108-383
3x8x3 Radial Bearing
108-383
3x8x3 Radial Bearing
106-301
0.15mm Shim
106-301
0.15mm Shim
109-353
3x5x2.8 Brass Spacer
516-405
Guide Pulley
109-353
3x5x2.8 Brass Spacer
516-222
Tension Guide Pulley
108-383
3x8x3 Radial Bearing
108-364
3x6x2.5 Flanged Bearing
108-364
3x6x2.5 Flanged Bearing
516-224
Idler Top Brace
108-364
3x6x2.5 Flanged Bearing
516-220
Idler Mount Bracket
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
04 | BELT TENSION ARM
12
Rev 1.0M
BELT TENSION ARM