Cov lus qhia

Syndeo by Tagra
®
Syndeo Plug & Play LED Strip Light Kit
- Instructions
Package Contains
6x Solderless
Connectors
6x Connector
Cables
1.5m UK Power
Cable
DriverReel of
Strip Light
Instructions
1. Cut the strip light at your desired length
using the marked cut-points.
2. Insert wires into the solderless connector. 3. Insert strip light into the solderless
connector and check the polarity.
4. Compress the metal clips on the solderless
connector to secure the wire and strip light.
5. Insert syndeo connector into the driver 6. Turn on power to the driver.
1 2 3
+ +
_ _
+
_
_
+
4 5 6