Install Instructions

SYNCOMM Proprietary
1
1. Installation Guide
1.1. Material List
PACS RADIO PORT Material List
Component
Number
Specification Quantity
1 RADIO PORT 1
2 MOUNTING PLATE 1
3 ANTENNA BRACKET 2
4 BRACKET ANGLE 4
5 MOUNTING BELT 2
6 MECHINIC SCREW M6*20 8
7 MECHINIC SCREW M6*40 4
8 WASHER 24
9 NUT SCREW 12
10 SPRING WASHER 12
11 ANTENNA ASS'Y 2
12 ANCHOR BOLT 2
13 ANTENNA CABLE 2
14 ABS COVER 2
1.2. Installation on utility pole or cylindrical pole
1.2.1.Installation requirements
The diameter of the utility pole or cylindrical pole should be between 20cm
and 35 cm. The material of the pole can be wood, cement or metal.
1.2.2.Installation procedure
Step 1.:
According to figure 5-1, assemble components (3) and (4) for two
sets (left and right) by M6*40 screws with grommet or spring
grommet between the screw and screw nut using components (7),
(8), (9), and (10).
Step2: