User Manual
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
MC3-LITE
4-Channel Ultra-compact Audio Mixer
User Manual
Caring For Your SYNCO Product Product Introduction
Package List
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics
damage.
Warranty does not apply to human errors.
MC3-LITE Audio Mixer x1
3.5mm TRS to TRRS cable x2
Charging Cable x1
① Power Button & Power Indicator
Press to turn on/o the system.
When the system is on, the indicator stays on yellow.
② Wireless Connection Button & Wireless Control Indicator
Press the button, turn to Bluetooth interface on your phone and nd
“MC3-LITE” for connection.
The indicator stays on blue when the function is on.
③ Low Battery Indicator
When the battery is running low, the indicator would stay on red.
④ Charging Indicator
The indicator stays on green during charging procedure and is o
once charging is fullled.
⑤ Stepless Gain Control Dial
Separate gain control dial is provided for each output port.
⑥ Monitoring/Output Switch
Switch the 3.5mm jack to Monitoring or Output as needed.
⑦ 3.5mm Output Jack
To connect with mobile devices.
⑧ 3.5mm Output/Monitoring Jack
Depending on the Monitoring/Output Switch, this jack can be
switched between output or monitoring. Headphones can be
plugged into this interface for monitoring.