User's Manual

f. The device will attempt to join any available
SynapSense Wireless Sensor Networks. For more
information on network formation, node placement,
please see the SynapSense Wireless Network User
Guide.
Battery Cover Orientation:
The battery cover can be orientated to allow either full weather
sealing, or to allow for the correct operation of the internal
temperature and humidity sensors. The cover contains an
protrusion near the long edge which can be placed over a port
near the battery compartment. For full weather sealing, place
the cover so that this protrusion covers the gasketed port. To
allow the operation of the sensor, leave the port uncovered.
[ insert diagram here ]
External Sensor Operation:
The SynapNet node allows for the connection of up to 4
external sensor interface devices. Please be sure to remove all
batteries from the device prior to working on the SynapNet
Node.
To access the sensor interface device mounting slots, the four
corner Torx screws must be removed. Please use the correct size
Torx driver (T10).
[ screw diagram ]
Consult the guide provided with the sensor interface device for
specific instructions on mounting the card within the SynapNet