User's Manual

2. Operation
The SynapNet Node is designed to work in conjunction with a
SynapNet Gateway device and the SynapSoft console. Please be
sure you have correctly configured SynapSoft on the gateway
computer prior to continuing.
SynapNet nodes can be added to an existing SynapSense Wireless
Network (driven by a SynapNet Gateway) or be used to form a
network. Note that battery life will be compromised if the
SynapNet Node is not in range of an active gateway device or
other SynapNet Node which is part of a running network.
Installing external antenna (for part numbers 99-0039-001, -002, -003):
a. Remove the antenna from the packaging, making sure
the threaded base of the antenna is clear of any debris.
b. Screw the antenna into the antenna port on the top of
the device via the metal base in a clockwise direction
until it is snug. Do not use a wrench or other high-
torque tool to tighten.
Installing batteries:
a. Remove the Lithium AA batteries from the packaging
material.
b. Unscrew the two screws on top of the device holding
the battery cover in place.
c. Insert the batteries into the marked positions in the
orientation displayed on the device.
d. The device will blink an alternating blue/white and
purple color for five seconds when the batteries are
correctly inserted.
e. Replace cover on the device paying attention to the
orientation (see: Battery Cover Orientation following).