User's Manual

e. Replacethebatterycover.
f. TurnOn/OffswitchtoONposition(ForRemoteGateway2
thisismarkedasaIonthefaceplate).
g. ThedevicewillattempttojoinanyavailableSynapSense
WirelessSensorNetworks.Formoreinformationon
networkformation,nodeplacement,pleaseseethe
SynapSenseWireless
NetworkUserGuide.

TroubleshootingandDiagnostics:


1. NolightsappearwhenbatteriesareinsertedorOn/Offswitchisturned
toONposition
Pleasebesurethebatteryorientationiscorrectandthatthe
batteriesarefreshandcharged.

2. Asolidredlightappears(DoesnotapplytoRemoteGateway2)
Thebatteryonthe
devicehasfallenbelowallowableoperating
levelandthedevicehassuspendeditsselftopreventnetwork
problems.

3. Theredlightflashesbrieflyevery5seconds(DoesnotapplytoRemote
Gateway2)
Thenodeiscurrentlynotassociatedwithanactivewireless
sensornetwork.Makesurethenode
isinrangeofeitheran
activegatewaydeviceoranothernetwork‐associatedSynapNet
Node.Anodemaytakeupto20minutestofullyjoinan
existingnetwork.

Nodesmayfalloutofanactivenetworkiftheirsignalstrength
isweak.Considertopologychangessuchastheadditionof

repeatersofthemovementofothernodesinordertoimprove
signalconditions.Formoreinformation,seetheSynapSense
WirelessSensorNetworkUser’sGuide.
