User's Manual

Subfloor EZ Node Hardware Installation Guide
Version 1.0
16
Subfloor EZ Node LED Status Lights
A light pipe located on the front of the Subfloor EZ Node provides a means to turn the unit on and off
and to provide status.
To power the unit on, push and hold the button for more than 1 second. The light pipe toggles between
white and magenta.
As the unit is connecting to the network, the light pipe will display as follows:
 When the unit is looking for the network, it blinks red every 2 seconds.
 When the unit is time synchronizing, it blinks green every 2 seconds.
 When the unit is joining the network and performing a security handshake, it blinks yellow
every 2 seconds.
When the unit is in the on state, press the button quickly to display the status on the LED lights.
 When green displays for 3 seconds, the unit is connected to the network and is reporting.
 When cyan displays for 3 seconds, the unit is in sleep mode.
Push and hold of the button for more than 1 second (but less than 3 seconds) to reset the unit. The light
pipe will display as blue while you press the button.
Push and a hold for more than 3 seconds to turn the unit off. The light pipe will toggle between magenta
and blue five times as the unit powers off.