User's Manual
Table Of Contents
SynapSense Intelligent Gateway Installation Guide
December 17, 2013
vi
About This Guide
This document provides guidelines and instructions for installing and configuring the SynapSense
Intelligent Gateway device. The intended audience for this document consists of customers or
partners of SynapSense Corporation or a SynapSense installer (or installation team). Customers,
partners, or installers should receive training from SynapSense prior to installing the hardware
detailed in this document.
Organization
Although we prefer the entire document to be read in order of presentation, we realize that readers
may jump to a particular section. The table below describes the chapters and summarizes their
content.
Table 1 – Chapter Summary
Chapter Description
Introduction
Provides an overview of the device, its capabilities, and minimum
requirements for use.
Installation & Configuration
Provides detailed steps for installing and configuring the device.
Installation Inspection
Provides the steps to verify proper installation and device
connectivity.
Troubleshooting
Provides information about correcting problems that may occur
during installation, configuration, or use of the device.
Document Conventions
The table below defines the style conventions used throughout this document.
Table 2 – Installation Guide Style Conventions
Item Description
Bold and Blue
This style is used for anything a user types, clicks, presses, or taps. The style
also highlights SynapSense products.
For example, Click OK.
NOTE:
Exceptions to the rule and other important information will be set off with this
note style.
This triangular red exclamation mark icon denotes a WARNING.
This triangular yellow electrical icon denotes a SAFETY WARNING of a physical
or electrical nature.