User's Manual
Table Of Contents
SynapSense Intelligent Gateway Installation Guide
December 17, 2013
18
10. Repeat previous steps for remaining Gateways to be installed.
When all Gateways are installed, proceed to the Final Installation Activities
section.
Gateway Mounting Shelf
NOTE: Screws and other associated hardware for mounting the Gateway Mounting Shelf are not
included in the SynapSense Gateway kits and must be supplied by the customer.
1. Using the Gateway Mounting Shelf mounting holes as a template, position the shelf in the
desired location (i.e. wall or pillar), and mark the holes to be drilled with a pencil.
2. Using a drill and the appropriate drill bit, drill the four mounting holes marked on the
installation surface.
3. Install appropriate-sized screws in the drilled mounting holes. Do not tighten screws completely.