User's Manual

SynapSense Intelligent Gateway Installation Guide
December 17, 2013
5
Tools and Materials
The table below lists the minimum tools and additional material requirements that SynapSense Field
Engineers (FEs) and contracted electricians must bring to the job site.
Table of Tools and Materials
Item Description/Comments
Attire Proper dress and shoes for performing work in a data center (including areas
inside the sub-floor and above ceiling tiles)
Ladder or step stool Ladder or step stool of sufficient height to reach all Gateway installation
locations (typically placed well above the height of all server cabinets in their
service radius)
Laptop Laptop computer with supported browser installed (Internet Explorer, Firefox, or
Chrome)
Spares
Spare Gateway modules.
Materials Plenum-rated Zip-ties
Adhesive Sensor Clips
Cable Clips
3M Command Strips
Alcohol Wipes
Tools Multi-Meter
Flashlight
Diagonal cutters
Utility knife
Scissors
Screwdrivers
Torque wrench
Pliers
Wire strippers
Drill/bits
Drill pilot holes for enclosure mounting
Label maker
Create identification labels for wires
Documentation This installation document
Printed MapSense layout of the data center (shows where Gateways will be
located in the data center)
Identification
Photo ID to present to data center security personnel