User Manual

Table Of Contents

Model SM240 Data Sheet · Document Number 430154-01A · Page 12 of 12

Table 2.2. Approved IC Antennas

Part Number Type Gain Application Min. Separation

N/A Inverted F PCB etch 0.0 dBi Fixed/Mobile 20 cm.

2.2.1 OEM Labeling Requirements

Labeling requirements for Industry Canada are similar to those of the FCC. A clearly

visible label on the outside of the final product housing must display the contents shown

in Figure 2.2 below.

Figure 2.2 IC Label

NOTE: The OEM can choose to implement a single label combined for both FCC and

IC labeling requirements. If a combined single label is chosen, there must be a clearly

visible label on the outside of the final product housing displaying the contents shown in

Figure 2.3 below.

Figure 2.3 Combined FCC and IC Label

MANUFACTURERS NAME

BRAND NAME or TRADE NAME

MODEL:

Contains IC: 7084A-SM240

MANUFACTURERS NAME

BRAND NAME or TRADE NAME

Contains FCC ID: U9O-SM240

Contains IC: 7084A-SM240

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interferences, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.