User Manual

DRAFT COPY
Generated on
9/16/2014
4
SNAP Engine SM220 Series Data Sheet — 430000-01A
SM220
Pin
Pin Name Pin Description
C7 NC
C8 NC
D1 PB5_OC1A_PCINT5 IO or PWM or Interrupt
D2 PB6_OC1B_PCINT6 IO or PWM or Interrupt
D3
PB7_OC0A_OC1C_P
CINT7
IO or PWM or Interrupt
D4 NC
D5 NC
D6 NC
D7 NC
D8 GND Power Supply
E1 PB2_MOSI_ PCINT2
2
IO or Interrupt
E2 PB3_MISO_ PCINT3
2
IO or Interrupt
E3 PB4_OC2A_PCINT4 IO or PWM or Interrupt
E4 NC
E5 NC
E6 NC
E7 NC
E8 NC
F1 PB0_SSN_PCINT0
2
IO or Interrupt
F2 PB1_SCK_PCINT1
2
IO or Interrupt
F3 PD1_SDA_INT1
3
IO or Interrupt
F4 PD0_SCL_INT0
3
IO or Interrupt
F5 Test Point - Do Not Use
F6 Test Point - Do Not Use
F7 NC
2 These pins have special SPI hardware that is not natively supported by SNAP. You can use PEEKand POKE to initiate and enable this
hardware functionality, but it is not supported by Synapse and we cannot guarentee your results.
3 These pins have special I
2
C hardware that is not natively supported by SNAP. You can use PEEKand POKE to initiate and enable this
hardware functionality, but it is not supported by Synapse and we cannot guarentee your results.