User Manual

Table Of Contents

Model SM200 Data Sheet · Document Number 430145-01B · Page 21 of 21

2.2.2 OEM Labeling Requirements

Labeling requirements for Industry Canada are similar to those of the FCC. A clearly

visible label on the outside of the final product housing must display the contents shown

in Figure 2.2.

NOTE: The OEM can choose to implement a single label combined for both FCC and

IC labeling requirements. If a combined single label is chosen, there must be a clearly

visible label on the outside of the final product housing displaying the contents shown in

Figure 2.3.

MANUFACTURERS NAME

Figure 2.2

IC Label

BRAND NAME or TRADE NAME

MODEL:

Contains Model SM200 IC: 7084A-SM200

MANUFACTURERS NAME

Figure 2.3

Combined FCC and IC Label

BRAND NAME or TRADE NAME

MODEL:

Contains Model SM200 FCC ID: U9O-SM200

Contains Model SM200 IC: 7084A-SM200

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interferences, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.