User's Manual

2.2 Canada (IC)
This Class B digital apparatus meets all requirements of the Canadian Interference
Causing Equipment Regulations. Operation is subject to the following conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
2.2.1 OEM Labeling Requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A
clearly visible label on the outside of the final product housing must display the
contents shown in Figure 2-2 below.
Figure 2-2. IC Label
* The IC ID for the RF Engine without amp is “7084A-RFE”. The IC ID for the
RF Engine with amp is “7084A-RFET”
NOTE: The OEM can choose to implement a single label combined for both
FCC and IC labeling requirements. If a combined single label is chosen, there
must be a clearly visible label on the outside of the final product housing
displaying the contents shown in Figure 2-3 below.
MANUFACTURERS NAME
BRAND NAME or TRADE NAME
MODEL:
Contains RF Engine IC: 7084A-RFE*