User Manual

RF300PD1 Data Sheet Document Number 430135-01A Page 13 of 13
n Separation
Linx ANT-916-CW-RCL Dipole (quarter-wave RPSMA) - Fixed/Mobile 20 cm.
2.2.1 OEM Labeling Requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly
visible label on the outside of the final product housing must display the contents shown
in Figure 2.2 below.
NOTE: The OEM can choose to implement a single label combined for both FCC and
IC labeling requirements. If a combined single label is chosen, there must be a clearly
visible label on the outside of the final product housing displaying the contents shown in
Figure 2.3 below.
MANUFACTURERS NAME
Figure
2.2
IC Label
BRAND NAME or TRADE NAME
MODEL:
Contains RF Engine IC: 7084A-RF300
MANUFACTURERS NAME
Figure 2.3
Combined FCC and IC Label
BRAND NAME or TRADE NAME
Contains RF Engine FCC ID: U9O-RF300
Contains RF Engine IC: 7084A-RF300
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interferences, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.