User Manual

Model RF200A Data Sheet · Document Number 430133-01D · Page 6 of 15
©2013 Synapse Wireless, Inc. · 500 Discovery Drive, Huntsville, AL 35806 · 256-852-7888 · synapse-wireless.com
Figure 1.0 Block diagram showing the major subsystems comprising the RF200A
1.1 Specifications
Table 1.0. RF200APD1 / RF200APF1 Specifications
Performance
Outdoor LOS Range Up to 2 miles at 250 Kbps
Transmit Power Output 18.76 dBm
RF Data Rate 250Kbps, 500Kbps, 1Mbps, 2Mbps
Receiver Sensitivity -103 dBm (1% PER)
Power Requirements
Supply Voltage 2.7 - 3.6 V
Transmit Current (Typ@3.3V) 92mA
Idle/Receive Current (Typ@3.3V) 23mA
Power-down Current (Typ@3.3V) 1.4uA
General
Frequency ISM 2.4 GHz
Spreading Method Direct Sequence (DSSS)
Modulation O-QPSK
Dimensions 1.333" x 1.333"
Operating Temperature - 40 to 85 deg C.
Antenna Options
RF200
A
PD1:
External RPSMA
RF200
A
PF1:
F- antenna
Networking
Topology SNAP
Error Handling Retries and acknowledgement
Number of Channels 16
Available I/O
UARTS with HW Flow Control 2 Ports - 8 total I/O
GPIO 20 total; 7 can be analog-in with 10bit ADC
Agency Approvals
FCC Part 15.247 FCC ID: U9O-RF200A
Industry Canada (IC) IC: 7084A-RF200A
CE available as a custom part. Call 1-877-982-7888.