User Manual
Table Of Contents
Model RF200A Data Sheet · Document Number 430133-01D · Page 10 of 15
©2013 Synapse Wireless, Inc. · 500 Discovery Drive, Huntsville, AL 35806 · 256-852-7888 · synapse-wireless.com
to either the host board or to the enclosure to handle the mechanical stresses that can
occur when an external antenna is screwed into the SMA. Picture 1.1 shows the
RF200PD1 with RPSMA connector mounted to the host board.
1.6 Ordering Information
Part Number Description
RF200APD1 802.15.4 Wireless Module with RPSMA connector
RF200APF1 802.15.4 Wireless Module with PCB Inverted-F Antenna
Host Board RF200APD1 Mounted
Picture 1.1 RF200APD1 Mounted To Host Board
2.0 Agency Certifications
2.1 United States (FCC)
The Model RF200A modules comply with Part 15 of the FCC rules and regulations.
Compliance with the labeling requirements, FCC notices and antenna usage guidelines
is required. In order to comply with FCC Certification requirements, the Original
Equipment Manufacturer (OEM) must fulfill the following requirements.