User's Manual

Page 12 of 14 RF Engine 200 Series Data Sheet — 430133-01C
Since the 2400-2483.5 MHz band is not harmonized by a few countries throughout Europe, the
Restriction sign must be placed to the right of the CE marking as shown in the drawing.
Labeling requirements for Industry Canada are similar to those of the FCC.
A clearly visible label on the outside of the final product housing must
display the contents shown in Figure 2.2 below.
MANUFACTURERSNAME
BRANDNAMEor TRADENAME
MODEL:
Contains RF200 IC: 7084A-RF200
Figure 2.2: ICLabel
NOTE: The OEM can choose to implement a single label combined for both FCC and IC
labeling requirements. If a combined single label is chosen, there must be a clearly visible
label on the outside of the final product housing displaying the contents shown in Figure 2.3
below.
MANUFACTURERSNAME
BRANDNAMEor TRADENAME
Contains RF200 FCC ID: U90-RF200
Contains RF200 IC: 7084A-RF200
This device complies with Part 15 of the FCCRules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interferences, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Figure 2.3: Combined FCCand ICLabel
NOTE: The OEM can choose to implement a single label combined for FCC, CE and IC
labeling requirements. If a combined single label is chosen, there must be a clearly visible
label on the outside of the final product housing displaying the contents shown in Figure 2.4.