Data Sheet

SNAP Engine RF220 Series Data Sheet — 116-061507-008-G000

Mechanical Drawings

RF220UF1 Mechanical Drawing on page 6

and

Block diagram showing the major subsystems comprising

Model RF220UF1 on page 7

are for modules with the compact F antenna and U.FL Connector options.

NOTE: For best performance, the module should be mounted on the outside edge of the circuit board with the

antenna side as close to the edge of the board as possible.

Figure 1.1: RF220UF1 Mechanical Drawing

NOTE: The area under the module's antenna (marked KEEPOUTAREA)should have no components, no

traces, and no copper on any layer of the printed circuit board.