Data Sheet
2
SNAP Engine RF220 Series Data Sheet — 116-061507-008-G000
• 4K internal EEPROM
• 6 PWM outputs
• Supports over the air firmware upgrades.
(This process is further defined in the Portal User Guide.)
Specifications
Performance
Outdoor LOS
Range
3 miles using u.fl antenna
.5 mile using on-board F antenna
Transmit
Power Output
up to +20 dBm
RF Data Rate 250Kbps, 500Kbps, 1Mbps, 2Mbps
Receiver
Sensitivity
-103 dBm (1% PER, 250Kbps)
Power
Requirements
Supply
Voltage
2.0 - 3.6 V
Transmit
Current
(Typ@3.3V)
at +20 dBm: 150 mA
at +6 dBm: 55 mA
Idle/Receive
On
(Typ@3.3V)
22 mA
Idle/Receive
Off
(Typ@3.3V)
7.8 mA
Sleep Mode
Current
(Typ@3.3V)
Timed Sleep: 1.27 µA
Untimed Sleep Mode : 390 nA
Table 1.1: RF220UF1 Specifications at 23° C and 3.3Vunless otherwise noted