THD-2850/2860/2880 CONTENTS 1. General Information 1.1 Main Features 1.2 For Your Safety 1.3 Unpacking (optional) 1.4 General Operation 1.5 RCU (Remote Control Unit) 2. Installation 3. Welcome Page 4. Main Menu 4.1 Edit Channel 4.2 Installation 4.3 System Setup 4.4 Tools 4.5 Game 4.6 REC 4.7 Hot key 5. Trouble Shooting 6. Specifications 2 2 2 3 3 3 4 4 4 5 7 8 10 13 13 14 17 18 1.
THD-2850/2860/2880 • Switch the receiver off whenever it remains out of service for an extended period. • Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soapand-water solution and wrung out thoroughly, and then wipe again with a dry cloth. 1.3 Unpacking (optional) • Remote Control • Batteries • User’s manual • AV cable 1.
THD-2850/2860/2880 2. INSTALLATION Rear Panel Connecting to TV using SCART support Connecting to Digital Amplifier 4. MAIN MENU • When you press [MENU] key, you can enter Main Menu. This menu consists of 6 majorsub-menus as below. - Edit Channel - Installation - System Setup - Tools - Game - REC 3. WELCOME PAGE • When power on first time, it will show welcome page like below. • Press PR+,PR- keys to move highlight to select Region, Display Mode, Aspect Mode and language.
THD-2850/2860/2880 4.1 Edit Channel • Move highlight on Edit Channel item and press [OK] key to enter Edit Channel menu as besides. This menu has 3 sub-menus such as: TV Channel list, Radio Channel List and Delete All. 5 Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program.
Sort (red colour key) Press red colour key to pop up the Sort drop-down list. Name(A-Z): The ascending order, omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (AZ). Free/Scrabmle: All FTA programs are listed ahead, while all scrambled programs are listed last. Lock: all locked programs are listed at the bottom. Default THD-2850/2860/2880 Numeric keys Press numeric key repeatedly, display in circle 1 .
THD-2850/2860/2880 Press EXIT key to pop up the dialogue “Are you sure to save?”. Select Yes button and press OK key to save, or select NO button and press OK key to exit without saving. Move the highlight on the search option, and press [OK] key to start scanning. Press [EXIT] key to exit this menu. 4.1.2 Radio Channel List The same operation as 1.1 TV Channel List, here we don’t explain any more. 4.1.
4.2.4 LCN Press [Left/Right] key to choose On and Off. 4.3 System Setup When you enter the System Setup menu, you will see the screen like besides. It contains 8 sub-menus such as: Language, TV System, Local Timer Setting, Timer Setting, Parental Lock, OSD Setting, Favorite and Auto Standby . Press [Up/Down] key to select menu among all the items. Press [OK] key to enter the selected item. 4.3.1 Language 1. Press OK key to enter into the Language window.
THD-2850/2860/2880 5. Date, Time: When select “OFF” in GMT Usage, Date and Time two items take effect, while GMT Usage turns grey. Use numeric keys to input the desired value.5. After setting, press MENU key or EXIT key to exit and save. If the value is invalid, system will inform “Invalid input! Continue to edit?”. Press OK key at the Yes button to continue the modification, or press OK key at the No button to exit without saving. 4.3.
4.3.7 Favorite There are 8 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window, here we don’t explain any more. THD-2850/2860/2880 When you enter Information menu, you should see the screen like it displays on the right. This screen displays receiver information. You should press [EXIT] key to cancel this menu. 4.4.
THD-2850/2860/2880 11 If no correct searching information, system will inform “Collecting information”. You can press Exit button to return to the previous window. System will start upgrading after collecting information successfully. Press OK key at the Download button and press OK key at the Burnflash button to start burning. After booting, press OK key at the Reboot button to reboot. 3. Press OK key on start button to start receiving the data from USB device.
3. Press INFO key to display the Setup window. 4. Press FIND key to display the Sort window. FAV: Press FAV key add the image you selected to the Play List. THD-2850/2860/2880 Press yellow key and select the image button in the window, you can see the iamge you selected and in this list you can play and delete them. Red key: Playing the picture. Yellow key: Delete the picture you selected. Blue key: Delete all the picture in the list. Setup Show Image Size: Select between full and real.
THD-2850/2860/2880 basic information about this conditional access such as Card Status, CAS System ID, Interface Version, Card Number, Number of sessions, Language and so on. 4.4.8.1 Subscription Status Know the detail information of Subscription Status. 4.4.8.2 Event Status Know the detail information of Event Status. 4.4.8.3 Tokens Status Know the detail information of Tokens Status. 4.4.8.
4.6.1 Record Manager 1. Press PR+, PR- keys to select up or down, 2. Press green color key to lock the file you selected, the lock symbol will be marked behind the file. Before you lock the file you must input the correct password, the default password is 0000. 3. Press blue color key to delete the file you selected. 4. Press red color key to pop up the window for renaming the file you selected, press numeric keys (0-9) to input the character. 5. Press [Play] key to preview.
THD-2850/2860/2880 2. Press PR+, PR- keys to select the channel up or down, and then press OK key to play this channel in full-screen. 3. Press MENU or EXIT key to close this window. 4.7.12 FAV 1. Press FAV key to pop up the favourite group window. 2. Press keys to select the favorite group. Press PR+, PR- keys to select the channel up or down. Press OK key at the selected channel to view it in full-screen. Press MENU or EXIT key to exit. 3.
3. Detail Information: In the EPG window, press PR+, PRkeys to select the channel and program, and press OK key to know the detail information of the current program. 4. Press green colour key to enter into the Timer window. You can add the current program to the Timer. If 8 timers is already, system will inform “Timer is full!’. 4.7.14 Subtitle Press key to open the subtitle window on the screen.
THD-2850/2860/2880 5. TROUBLE SHOOTING Problem Possible causes What to do The display on the front panel does not light up. Main cable is not connected. Check that the main cable is plugged into the power socket. No sound or picture, but the front panel shows red light. The receiver is in standby mode. Press the standby button. No sound or picture. No signal or weak signal. Check the cable connections, antenna and other equipment connected between the antenna and the receiver.
THD-2850/2860/2880 6. SPECIFICATIONS Main Features CPU frequency: Flash Memory SDRAM Memory Tuner Tuner Type Frequency Range Input Impedance Active Ant Power Input Level Range ANT Loop-Through Video Decoding Video Decoding Aspect Ratio Video Resolution Demultiplexer Input Bit Rate Audio Decoding Audio Decoding 400MHz 1PC 32Mbit/4MByte 1PC 64X16Mbit/128Mbyte DDR2-800 Onboard Tuner IT9133 177.5 ~ 227.5MHz; 474 ~ 858MHz 75 Ω 5VDC @ 50mA MAX, Overload Protection 64QAM:-78.5dBm ~ -8.75dBm; 16QAM:-84.
THD-2850/2860/2880 NOTE
