User's Manual

28
Set-up the IP address of the USB network connection in the MS Windows®
environment:
a. Go to: control panel → network connections
b. Right click the USB connection → properties
c. Select "Internet Protocol (TCP/IP)" from scroll box under the general tab →
properties
d. Select "Use the following IP address:"
e. Enter: IP address: 192.168.54.2, Subnet mask: 255.255.255.0
f. Hit OK twice to save settings and close the network connection properties dialog
ADC Router Connectivity Verification Instructions
To verify router connectivity out from the host computer port:
a. Right click the USB connection → Status
b. Confirm under General tab that the number of data packets sent and received are
not zero
Alternative method
To verify connectivity out from the host computer port:
a. Select: Start → Run…→ type cmd in Open: field → OK
b. At command prompt type: ipconfig and press Enter key.
c. Confirm returned message: “IP Address 192.168.54.2; Subnet Mask:
255.255.255.0”
To verify connectivity from TCP/IP router from host computer:
a. Select: Start → Run…→ type cmd in Open: field → OK
b. At command prompt type: ping 192.168.54.3 and press Enter key.
c. Confirm returned message: “Packets: Sent = 4, Received = 4”