User's Manual

24
o Place the UIT into the cradle for a minimum of two hours for the initial charge. The
UIT indicator light will glow steady green when it is charging.
o After UIT is charged, remove by gently pulling it straight up and out from the cradle.
ADC Communication
Verification
The following test sequence determines connectivity between devices for the ADC system.
Initially, the UIT handheld unit must be charged to capacity as described on page 18.
TIM Communication
a. On side of TIM verify that LED indicators are illuminated as described on page 10.
b. UIT input of TIM ID
c. Truck Cradle Bluetooth recognition LED
d. TIM LED reply
e. DoDFM AE Aviations Transactions Table, Active Ledger