User's Manual

ADC Receipt Printer

The graphics capable thermal receipt printer is a fully hot pluggable print mechanism that

permits the user to connect or disconnect the printer while powered without damaging the

unit. The unit prints at 8 dots resolution mm/s and possesses a high-speed mode of 50

mm/s. The printer is capable of printing text, graphics and barcodes. The printer can

communicate via serial or parallel communications protocol and has inherent self-test

capabilities.

Figure 13 – ADC Receipt Printer

LED Power indicator On when the printer is powered.

Paper feed Push the paper feed button to feed paper through

the printer.

On/Offline Push the On/Offline button to pause printing.

Push the button again to resume printing.

LED Power

Indicator

AC Line Status indicates the UIT is

either Online and in a charging cradle

or Offline and out of the cradle

running on the internal battery.

Battery Voltage is the voltage value

resent in the battery.

Battery Current indicates the

charging cycle condition of the UIT

battery. A negative value denotes the

discharging interval of the cycle.

Figure 12 - Battery Health / Batt Stat

er feed

On/Offline