User's Manual

10
TIM LED’s and Antenna Connection
Figure 2 - TIM Indicator LEDs and Antenna connector
Antenna Kit
The Antenna Kit (981A0270) installation contains the coaxial cable with attached antenna.
The antenna is used in the RF transmitting of transaction data back to the Central Controller
PC. The antenna is mounted on the outside of the truck and for better reception, ideally
above the top of the truck cab. The antenna coax cable is then fastened into the connector
on the outside of the TIM box. (See figure 2)
LEDs
Power (Right) The power LED is the rightmost LED and when
illuminated green indicates 12 volts DC present.
Heartbeat (Center) The heartbeat LED when flashing green indicates that the
TIM processor is operational.
Radio (Left) The radio LED when illuminated red indicates a radio link
is established between the TIM and the Central Controller
PC.