Specifications

PAGE 5 OF 8
OPERATING INSTRUCTIONS
Using the Control Panel: (Locate in Figure 5)
Heater Control (Figure 3.C):
✦
Press once to activate high heat setting. Press second time to shut the heat off.
✦
Once heating is on, default temp is 80 °F showed on digital area. Long press the button 6s can transfer °F
to °C.
✦
There are 7 ranges which are 90°F, 85°F, 80°F,75°F, 70°F, 65°F, 60°F, press Turn up or Turn down for
choosing. No action after 15s digital area shows room temperature, and 5s later shows blank.
✦
These features can also be controlled with the Remote (Reference to Page 6 ).
Timer Control (Figure 3.D):
✦
Press once to activate timer setting, default is 0.5H, digital area shows 30.
✦
Press Turn up or Turn down to choose the timing, the options are 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
Off.
✦
Once the timer is on and desired setting is reached,the system will shut down after the chosen time.
✦
Child Lock : Press and hold the Timer button for approximately 6 seconds to activate the Child Lock
function, the display screen will “- -”, when the Child Lock is on, all the other features are not work. long
press the Turn down button 6s to close the Child Lock function.
Turn UP and Turn Down (Figure 3.E&F):
✦
Used in Flame, Heating, Timer controls.
✦
If not assisting in Flame, Heating, Timer controls, used to adjust the flame brightness.
Display Screen (Figure 3.G):
✦
The display screen will display the relative flames and heating temperatures and the timer information.
✦
The display screen will show “- -” when the Child Lock function is on. Long press the Turn up button 6s to
activate Child Lock function, long press the Turn down button 6s to close the Child Lock function.
Figure 3
A. POWERB. FLAME
C. HEATER
D. TIMER
E. UP
F. DOW N
G. DISPLAY SCREEN
PRODUCT#ZHS-23-N