Installation & Assembly

11
Buff using a soft non-abrasive cloth, slightly dampened with water.
⚫ DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Glass:
• Use a good quality non-abrasive glass cleaner and dry thoroughly with a paper towel or lint-
free cloth.
• NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
• Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
• Clean the exterior of the fireplace with a slightly damp cloth or duster.
Maintenance
Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury.
Electrical and Moving Parts:
• The fan motors have already been lubricated at the factory and will not require additional
lubrication.
• Electrical components are built into the fireplace and are not serviceable by the consumer.
Storage:
• Store heater in a clean dry place when not in use.
WARNING! No other servicing should be performed by the consumer. Do not attempt to
service the unit yourself.
Troubleshooting