Installation & Assembly

Installation instruction
FIRST：Assemble backrest(B)to
seat cushion(A)
1.Putting seat cushion（A）upside
down,
2. remove 4pcs Hexagon Flange
screws which already fixed on the seat
cushion (A)
3.Install metal joining parts on the
backrest（B）to be matched with seat
cushion 4 hole
4.Using 4pcs given Hexagon Flange
screws to tighten by wrench, please see
diagram besides
SECOND：Assemble legs to seat
cushion(A)and backrest(B)
1.remove 6pcs Hexagon Flange screws
which already fixed on the seat
cushion(A) seat cushion
2.Put two legs(C1+C2) to seat
cushion (A) and make sure holes on
legs matched with each holes on
seat cushion(A),install (C1) the
Short spring Leg on the side
which installed backrest.
3.Using 6pcs given Hexagon flange
screws to tighten by wrench, please
see diagram besides
A
B
A
C2
C1
C2
C1
3