Installation & Assembly

FINAL ASSEMBLY
2.) Plug transformer into socket and press the switch, your LED Light String is ready for use.
3.) The LED Light String will turn on automatically at dusk.
TROUBLE SHOOTING:
1.) If your LED Light is not functioning properly or losing power mid-cycle, Check your
connections to the tranformer - a loose or improperly connected cable will cause the LED Light
String to malfunction.
2.) The led light will turn on automatically every night.
READ AND SAVE THESE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
1.) Remove the cap from the connector , then join the connectors and screw the captightly
together.
4.) The LED Light String accepts expansion accessories (10 light extra string) and (12' length
extender cord) (sold separated).
Note:
The maximum limit of transformer is carry 3 piece light strings only.