Installation & Assembly

ManualsBrandsSymple Stuff ManualsCredenza DesksL-Shaped Credenza Desk

Label Picture Description QTY

A Left Metal Leg 2

B Right Metal Leg 2

Caution : You must read this before you proceed

Computer Table

Dear Customer: Thank You for purchasing one of our products, We hope you will

enjoy it. Please be aware this Product may require 60 Minutes to assemble. Please

carefully read through the instructions below.

Note: Do not fully tighten any Bolts or Screws until all are in place.

General Care: Keep your furniture out of direct sunlight. Use desk pads and

coasters to protect the surface from dents, scatches, and moisture condensation

from hot or cold liquids.

Cleaning: For cleaning, wipe the surface with damp (not wet) cloth or wipe dry with

a clean lint free cotton cloth.

Page 1 of 12

Summary of content (12 pages)

PAGE 1
Caution : You must read this before you proceed Computer Table Dear Customer: Thank You for purchasing one of our products, We hope you will enjoy it. Please be aware this Product may require 60 Minutes to assemble. Please carefully read through the instructions below. Note: Do not fully tighten any Bolts or Screws until all are in place. General Care: Keep your furniture out of direct sunlight.
PAGE 2
C Short Connection Pipe 2 D Long Connection Pipe 2 E Short Metal Connection Frame 1 F Long Metal Connection Frame 1 G Connection Frame Part 1 1 H Connection Frame Part 2 2 I Left Keyboard Tray 1 Page 2 of 12
PAGE 3
J Right Keyboard Tray 1 K Left Panel 2 L Right Panel 2 M Mid Glass Table Top 1 N Left Glass Table Top 1 O Right Glass Table Top 1 P Keyboard Panel 1 Q Keyboard Rail 1 Page 3 of 12
PAGE 4
Label Description QTY ① Bolt (M6x80mm) 17 ② Bolt (M6x40mm) 18 ③ Bolt (M6x30mm) 20 ④ Bolt (M6x4mm) 5 ⑤ Metal Nut 17 ⑥ Screw (M3.
PAGE 5
Overview This Computer Table has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Computer Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Attach the four Adjustable Glider Feet(⑦) to the bottom of the four Metal Legs(A) and Metal Legs(B) by hand or with Screwdriver(⑧).
PAGE 6
Step 2 Insert Metal Nuts(⑤) into the mounting positions of two Left Panels(K) and two Right Panels(L) by hand. Step 3 Insert the two Left Panels(K) into the two Left Metal Legs(A). Attach Left Panels(K) to Left Metal Legs(A) using Bolts(①) with Screwdriver(⑧). Insert the two Right Panels(L) into the two Right Metal Legs(B). Attach Right Panels(L) to Right Metal Legs(B) using Bolts(①) with Screwdriver(⑧).
PAGE 7
Step 4 Attach Short Metal Connection Frame(C) between Left Metal Leg(A) and Right Metal Leg(B) using Bolts(③) with Screwdriver(⑧). Attach Short Connection Pipes(E) between Left Metal Leg(A) and Right Metal Leg(B) using Bolts(②) with Screwdriver(⑧). Step 5 Disassemble the Keyboard Rails(Q) by first pushing up on the locking mechanism and then pulling the Rails apart as shown in the picture.
PAGE 8
Step 6 Attach Keyboard Rails(Q-1) to Left Keyboard Tray(I) and Right Keyboard Tray(J) using Bolts(④) with Screwdriver(⑧) using the mounting positions as indicated in the picture. Step 7 Attach Left Keyboard Tray(I) and Right Keyboard Tray(J) under the assembled Metal Frame using Bolts(②) with Screwdriver(⑧).
PAGE 9
Step 8 Attach Long Metal Connection Frame(F) between Left Metal Leg(A) and Right Metal Leg(B) using Bolts(③) with Screwdriver(⑧). Attach Long Connection Pipes(D) between Left Metal Leg(A) and Right Metal Leg(B) using Bolts(②) with Screwdriver(⑧). Note: This fully assembled section is the 'Right Frame' Step 9 Attach Connection Part 1(G) to Connection Part 2(H) using Bolt(②) with Screwdriver(⑧).
PAGE 10
Attach Connection Frame between Left Frame and Right Frame using Bolts(②) with Screwdriver(⑧). Step 11 Carefully place the Left Glass Table Top(N), Mid Glass Table Top(M) and Right Glass Table Top(O) onto the fully assembled Frame and attach using Bolts(③) with Screwdriver(⑧). Step 12 Attach Keyboard Rails(Q-2) to Keyboard Panel(P) using Screws(⑥) with Screwdriver(⑧). Note: Only use the mounting postions indicated in the above picture.
PAGE 11
Step 13 Insert the assembled Keyboard Panel into the Keyboard Tray as shown. Your Computer Table is ready for use. This Computer Table can only be used on a flat, level surface. Note: the Keyboard Tray can also be fixed to the Right Frame if preferred.
PAGE 12
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth. Children should not climb or jump on the furniture.