Installation Sheet
4
Installation
7) Remove housing (G) and ow
regulator (F) from spout (A). Turn
on water supplies and ush
faucet free of debris.
Operation
9) Optional: Adjust limit stop
washer to limit handle turn to the
hot position if desirable.
1) Push faucet handle inward to turn
faucet on.
2) Turn counter-clockwise to put
faucet handle in the hot position.
3) Turn clockwise to put faucet handle
in the cold position.
1
F
G
A
2
1
3
1
3
LIMIT HOT
LIMIT COLD
8) Install ow regulator (F) and
housing (G) to spout (A).
1
2
F
G
A
ON
HOT
COLD
Maintenance
1) Turn water supplies off. Remove
set screw (H), handle (I), mounting
ring (J) and escutcheon (K).
2) Use at head screwdriver
and rubber mallet to remove
compression nut (L).
3) Remove cartridge and inspect
for debris. Replace cartridge if
necessary.
3
2
H
I
4
J
K
1
L
4) Install cartridge following steps 1
and 2 in reverse.





