Specification

ManualsBrandsSymmons ManualsBathDuro Widespread Two-Handle Bathroom Faucet with Push Pop Drain Assembly in Brushed Bronze (1.0 GPM)

Model Numbers

Feature Highlights

☐

SLW3612PP Two Handle Widespread Lavatory

Faucet with a Push Pop Drain Assembly

☐

SLW3622PP Two Handle Widespread Lavatory

Faucet with a Push Pop Drain Assembly

• 8" to 16" mount conﬁguration

• Quarter turn ceramic cartridges

• 6-5/8" height (SLW3612PP)

• 4" height (SLW3622PP)

• Push Pop Drain Assembly

• Standard 1.0 gpm (3.8 L/min) ﬂow rate

• Faucet shall be metal construction, plated in standard

polished chrome ﬁnish

Compliance

ASME A112.18.1/CSA B125.1

NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372

WaterSense 1.0 gpm (3.8 L/min)

Certied by

IAPMO R&T

Limited Lifetime - to the original end

purchaser in consumer/residential

installations.

10 Years - for commercial/industrial

installations. Refer to

www.symmons.com/warranty for

complete warranty information.

Warranty

Duro®

SLW3612PP, SLW3622PP

Two Handle Widespread Lavatory Faucet

Operation & Maintenance Manual

WARNING: This product can expose you to

chemicals including lead, which is known to the

state of California to cause cancer, birth defects, or

other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

Summary of content (4 pages)

PAGE 1
Duro® SLW3612PP, SLW3622PP Two Handle Widespread Lavatory Faucet Operation & Maintenance Manual Model Numbers ☐ SLW3612PP ☐ SLW3622PP Feature Highlights Two Handle Widespread Lavatory • Faucet with a Push Pop Drain Assembly • • • Two Handle Widespread Lavatory Faucet with a Push Pop Drain Assembly • • • 8" to 16" mount configuration Quarter turn ceramic cartridges 6-5/8" height (SLW3612PP) 4" height (SLW3622PP) Push Pop Drain Assembly Standard 1.0 gpm (3.
PAGE 2
Duro® SLW3612PP, SLW3622PP Dimensions A Measurements A B C D D B C -H2 -H3 Note: Dimensions subject to change without notice. Min. 8", 203 mm Max. 16", 406 mm 1/2-14 NPSM (3x) Hole size Min. Ø 1-1/4", 32 mm Max. Ø 1-3/8", 35 mm Deck Thickness Ref. Min. 7/8", 22 mm Max.
PAGE 3
Parts Breakdown Replacement Parts Item Part Number spout Handle assembly handle (2) screw (2) escutcheon (2) RL-149 aerator & retainer handle handle escutcheon phillips head screw spindle extender valve cartridge cartridge sleeve moutning sleeve gasket gasket centerbody washer and plate spout retaining nut 2 mm wrench (included) LN-15* FLR-110-1.5* FLR-110-1.0* KN-114 (hot) OFF = CW Aerator & retainer washer flow rates 2.2 gpm (8.3L /min) aerator 1.5 gpm (5.7L /min) retainer 1.0 gpm (3.
PAGE 4
Quick Install Guide Step 2 Note: Handle escutcheon must be threaded to mounting sleeve before installing lever handle. 6 2 Installation Notes: 1) Apply plumber tape to threaded connections as shown in illustration. 2) DO NOT use plumber putty or plumber tape on fittings with face seal washers or o-ring seals. 3) DO NOT OVERTIGHTEN fittings with face seal washers or o-ring seals. 1 3 4 5 L Plumbers Putty Step 5 Note: Push Pop Install: Insert drain body (L) into drain opening.