Full Product Manual

 
STEP 3 – CONNECTING THE WATER SUPPLY

Fit the flexible pipe coming
from the faucet to the solenoid
valve housing.
IMPORTANT: Inlet and outlet
should follow the indicating
arrow in the solenoid housing

The faucet is provided with
an inlet nipple, if needed, t
the water supply inlet to the
adapter at the solenoid valve
housing.

Turn on the central water
supply and the shut-o valve
(angle valve) and check for
leaks.
INSTALLATION
INSTALLATION
STEP 1 - REMOVE ALL MOUNTING HARDWARE
Shut o water supply and remove the
hexagonal nut, the disk and the gasket. Do
not remove the o-ring from the base of the
faucet.
O-ring
Gasket
Disk
Hexagonal nut
STEP 2 – INSTALLING THE FAUCET

Place the faucet with the o-ring into
the hole in deck or lavatory. Make
sure the o-ring is located between
the deck or lavatory and the bottom
of the faucet.
O-ring
Center
hole

Under the deck, slide the gasket,
disk and hexagonal nut over the
flexible hose and secure the faucet
into place.
NOTE:
Make sure that the lter is
assembled between the housing
of the solenoid valve and the inlet
nipple.
Gasket
O-ring
Hexagonal nut
Disk
size of the hole:
 mm / .”.”