Specification
Origins
®
Feature Highlights Options/Modifications
S-9600TS-PLR, S-9600TS-PLR-TRM, S9600TSPLRTRMTC
Tub/Shower Valve System or Trim
Specification Submittal
Location:
• ASME A112.18.1/CSA B125.1
• Buy American Act (S-9600TS-PLR only)
Model Numbers
Compliance
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.
• Origins Tub/Shower Valve System or Trim
• Requires Temptrol
®
Pressure Balancing Tub/Shower Valve
(included with S-9600TS-PLR)
• Adjustable stop screw to limit handle turn
(included with S-9600TS-PLR)
• Integral diverter control
• Metal lever handle
• Diverter tub spout not included
• Showerhead not included
• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish
• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap
(order p/n S9600TSPLRTRMTC)
☐
S-9600TS-PLR
Tub/Shower Valve System with integral diverter control &
Temptrol Pressure Balancing Tub/Shower Valve
☐
S-9600TS-PLR-TRM
Tub/Shower Valve Trim with integral diverter control,
Temptrol Pressure Balancing Tub/Shower Valve ordered separately
☐
S9600TSPLRTRMTC
Tub/Shower Valve Trim with integral diverter control,
TA-10 ow control spindle and T-12A cap assembly, must order
Temptrol valve with Test Cap
Note: Append appropriate -sufx to model number.
☐
-B Brass escutcheon (chrome only)
☐
-CHKS Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
☐
-D Brass dome cover (chrome only)
☐
-LAM Metal finish insert handle
☐
-LP Loop handle
☐
-OP 13" oval plate
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-VP Vandal resistant escutcheon screws in place of
standard screws
☐
-X Integral service stops - allows water shut-off at
valve for service
☐
-STN Satin Nickel finish