Specification

Duro
®
Feature Highlights Compliance
S-3600
Valve and Trim
Specification Submittal
Location:
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Warranty
• Secondary integral volume control
• Metal lever handle
• Adjustable stop screw to limit handle turn
• Tub spout and showerhead not included
• Components shall be metal and nonmetallic construction,
plated in standard polished chrome nish
- ASME A112.18.1/CSA B125.1
Model Numbers
☐
S-3600
Valve and Trim with Symmons Temptrol
®
4-port pressure
balancing mixing valve
☐
S-46-1-BODY
Symmons Temptrol 4-port pressure balancing mixing valve
☐
S-46-1X-BODY
Symmons Temptrol 4-port pressure balancing mixing valve
with integral service stops
Options/Modifications
Note: Append appropriate -sufx to model number.
☐
-IPS 1/2" female IPS connections
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-REV Reverse coring, hot on right, cold on left,
for back to back installations
☐
-TRM Trim only, valve must be ordered separately
☐
-VP Vandal resistant escutcheon screws in
place of standard screws
☐
-X Integral service stops - allows water shutoff
at valve for service
☐
-X-CHKS Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
☐
-BBZ Brushed Bronze finish (available 2018)
☐
-MB Matte Black finish (available 2018)
☐
-STN Satin Nickel finish