Installation Guide

KN-2 Compression ring
KN-3RB* Solid handle
KN-3BRB* Loop handle
KN-4 Cartridge
KN-23 Anchor bar (2)
KN-26 Mounting spacer (2)
KN-157 Plug button
LN-8* Valve cap
LN-11* Screw (2)
LN-34 Cartridge wrench
LN-122 Acrylic Handle
LN-135 6” lever handle with red/blue indicators
LN-171 Screw
LN-363* Undercover plate
LN-370 Mounting gasket
LN-371BH Cartridge housing assembly
L-22 Set screw
L-36 Mounting nut (2)
RL-154* Pop-up drain assembly (complete)
P-26 Grid drain assembly (complete)
T-33 Plug button
For Decorative Finish Faucets add sufx to
parts marked with an asterisk as follows:
Sufx -STN: Satin Nickel nish
Sufx -BC: Brushed Chrome nish
RL-154
P-26
LN-370
LN-11
LN-363
LN-371BH
KN-4
KN-2
LN-8
KN-157
L-22
KN-3RB
LN-122
LN-171
T-33
KN-3BRB
LN-135
LN-34
Vandal resistant
aerator
removal tool
Standard aerator
Reference
chart
Figure 1
Removal tool part number, LL-60K
2.2 gpm (8.3L/min)
1.5 gpm (5.7L/min)
1.0 gpm (3.8L/min)
0.5 gpm (1.9L/min)
LN-15*
FLR-110-1.5*
FLR-110-1.0*
----
LN-101*
RL-288
(non-aerated)
RL-288-VP-1.0
(non-aerated)
LN-100*
Standard
Aerators
Vandal Resistant
with removal tool
Part Number
Aerator
(ow regulator)
Parts Assembly
Symmetrix Lavatory Faucet, S-20-BH Series
Dimensions Symmetrix Lavatory Faucet, S-20-2-BH (with braided supply hose)
Note: Dimensions subject to change without notice.
Symmons Industries, Inc. 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-329 REV I ■ 10127