Installation Sheet

ManualsBrandsSymmons ManualsPlumbingPlastic Drain Plunger with Chrome Trim

Non-

Removable Removable

stopper stopper

Quick Install Guide Sereno Lavatory Faucet, SLS-4312

Fasten drain body to sink

Step 3

Step 1

Attach faucet to sink or deck

Step 1

Attach pivot rod to drain body

Step 5

Connect lift rod, clevis strap,

pivot rod and adjust linkage

Step 6

Install stopper and

set eye position

Step 4

Flush water supply lines

Step 8

Attach drain body to drain trap

Step 7

Step 2

SConnect water supply lines

PLUMBERS

PUTTY

SLS-4312 ............ Chrome finish

SLS-4312-STN .... Satin Nickel finish

Model Numbers

Tools & Materials

 Need Help?

Contact Symmons customer service at

(800) 796-6667, (781) 848-2250

Email: customerservice@symmons.com

Monday - Friday 8:00 am - 7:30 pm EST

 Please check Symmons website

for technical help, the latest product

information and warranty policy.

www.symmons.com/service

Lavatory Faucet SLS-4312

Installation and Service Instructions

Sereno

™

Summary of content (4 pages)

PAGE 1
Sereno™ Lavatory Faucet SLS-4312 Installation and Service Instructions Tools & Materials Model Numbers  Need Help? SLS-4312............. Chrome finish SLS-4312-STN..... Satin Nickel finish PLUMBERS PUTTY Contact Symmons customer service at (800) 796-6667, (781) 848-2250 Email: customerservice@symmons.com Monday - Friday 8:00 am - 7:30 pm EST  Please check Symmons website for technical help, the latest product information and warranty policy. www.symmons.
PAGE 2
Installation Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing. Then open faucet valves to relieve water pressure. ■■ Place flange in drain opening and under sink screw drain body up into flange at least 2-3 turns until hand tight. Step 1 Attach faucet to sink ■■ Screw short threaded end of mounting bolt into bottom of faucet until stop is reached. ■■ Insert faucet, bolts, and flex hoses through center of base and mounting hole.
PAGE 3
fasten to clevis strap when in the up position and stopper is in the closed position. lift rod ■■ Insert lift rod into end of clevis strap and fasten with thumb screw at location where lift rod stopper can be stopper easily opened and closed. If necessary, select another location hole in clevis strap and re-adjust lift rod where fastened to clevis strap. Care of faucet finish Clean finish area by using mild soap and water or non-abrasive cleaners and then rinse immediately.
PAGE 4
Parts Assembly Sereno Lavatory Faucet SLS-4312 Replacement Parts handle reference table Part Number LN-315* lift rod LN-341* Valve cartridge reference table LN-314 LN-342* FLR-101-1.5* FLR-101-1.0* aerator reference table handle set screw button plug Set screw requires 2.5 mm Allen wrench valve cartridge aerator flow rate 2.2 gpm (8.3L/min) 1.5 gpm (5.7L/min) 1.0 gpm (3.