Specification

Identity
™
Model Numbers
Tub/Shower System
Specification Submittal
6700
Tub/shower system powered by the Temptrol
®
pressure-
balancing valve. Valve body includes adjustable stop
screw to limit handle turn. Components made from metal
and nonmetallic materials, plated in standard polished
chrome nish.
Specification
Location:
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
Modifications
Note: Append appropriate -sufx to model number.

6700
Identity Tub/Shower System
-ASME A112.18.1/CSA B125.1

-CHKS Integral check stops - for use in
installations where a positive shut-off
device is used downstream of mixing valve

-IPS 1/2" female IPS connections

-LP Loop handle

-LR Lever handle

-OP 13" oval plate

-REB-TRM
Rebuild trim kit

-REV Reverse coring, hot on right, cold on
left, for back to back installations

-STN Satin Nickel finish

-TRM Trim only, valve not included

-X Integral service stops - allows water
shutoff at valve for service