Specification Sheet

Warranty
■ Limited Lifetime - to the original end purchaser in
consumer installations
■ 5 years - for commercial installations
Museo
®
Location:
Feature Highlights
■ Symmons Shower System with lever handle
■ Symmons Tempt rol
®
pressure-balancing mixing valve
with adjustable stop screw to limit handle turn
■ Showerhead #532SH, single mode, 5-3/4 inch diameter
■ Showerhead mounting bracket and ange
■ Standard ow rate is 2.5 gpm (9.5 L/min)
Optional lower ow rate restrictor available
■ Polished chrome nish (standard)
Finish Options / Modifications
Append appropriate -sux to model number

-STN
Satin nickel

-BLK
Polished graphite
-
Polished chrome (standard nish)
Model Numbers
☐
5301
Shower System with Symmons Temptrol mixing valve
p/n 46-2-BODY
☐
5301-TRM
Trim only, valve must be ordered separately
☐
46-2-BODY
Symmons Temptrol mixing valve without trim
☐
46-2X-BODY
Symmons Tempt rol mixing valve without trim.
Valve includes integral service stops
Standards / Certifications
ASME A112.18.1/CSA B125.1
Options / Modifications
Append appropriate -sux to model number
☐
-1.5
1.5 gpm (5.7 L/min) ow restrictor
☐
-2.0
2.0 gpm (7.6 L/min) ow restrictor
☐
-IPS
1/2" female IPS connections
☐
-LP
Loop handle
☐
-L/HD
Less showerhead
☐
-REB
Rebuild trim kit, includes TA-10 and TA-4
☐
-REV
Reverse coring, hot on right, cold on le, for back
to back installations
☐
-VP
Vandal resistant escutcheon screws in place of
standard screws
☐
-X
Integral service stops - allows water shuto at valve
for service
☐
-X-CHKS
Integral check stops - for use in installations where
a positive shut-o device is used downstream of
mixing valve
CG
Specification Submittal
Shower System
5301