Installation Guide

4
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3064 REV A 09/18/14
Note:
For valve body installation, please
see valve body installation guide.
1) Install large plastic mounting
plate (H) to shower valve. Secure
with two screws (E).
2) Attach shower escutcheon (G) to
large plastic mounting plate (H).
Note: Tabs should snap into place.
3) Install dome cover (D) to valve by
turning clockwise.
4) Install handle (C) to valve.
Secure handles by tightening
set screw (F).
5) Attach shower arm (B) to vertical
shower pipe. Turn clockwise to
tighten.
6) Install showerhead (A) to shower
arm (B). Turn clockwise to tighten.
1
2
E
H
1
2
A
B
G
H
1
2
D
1
2
C
F
1
2
B