Installation Guide

5
7) Install wall cradle ange (N) to
pipe tting. Turn clockwise to
secure.
8) Attach wall cradle (O) to wall cra-
dle ange (N) turning clockwise to
tighten.
9) Attach shower arm (B) and
ange (C) to vertical shower pipe
turning clockwise to tighten.
10) Install showerhead (A) to
shower arm (B) turning clock-
wise to tighten.
11) Attach large end of hand shower
hose (Q) to hand shower (M).
Attach small end of hand shower
hose (Q) and gasket to in-line
vacuum breaker (P). Connect
in-line vacuum breaker (P) to
wall cradle (O). Turn clockwise to
tighten.
Installation
2
1
N
1
2
N
O
1
2
B
A
4
1
3
2
Q
M
O
P
Q
1
2
B
C
Operation (Temperature Control)
1) Turn shower handle counter-
clockwise approximately 1/4 turn
to put valve in cold position.
2) Turn shower handle counter-
clockwise approximately 1/2 turn
to put valve in warm position.
3) Turn shower handle counter-
clockwise approximately 3/4 turn
to put valve in hot position.