Installation Guide

3
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3096 REV 0 06/18/2014
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
Notes: 473TB-18 and 473TB-24 only.
Make sure both centerline marks are
level.
2a) Dry Wall Option: Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes into wall
and install anchors.
2b) Stud Option: Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes into
wall.
3) With mounting brackets in
position, secure to wall using
screws.
4) Fully slide accessory body over
mounting plate and secure with set
screw.
1
2
2
1
3
1
3
3
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.