Installation Guide

5
Installation
8) Install wall elbow (B) to pipe tting.
Tighten set screw to secure.
9) Place cradle mount (P) in position,
mark and drill 1/8" pilot holes into
stud.
Option: Place cradle mount (P) in
position, mark and drill 3/16" holes
into wall. Install anchors.
10) Remove cover of wall cradle
(N). Install cradle mount (P) .
Secure with three screws (O) .
Replace cover on hand shower
cradle.
11) Attach shower arm (D) and ange
(E) to vertical shower pipe turning
clockwise to tighten.
12) Install showerhead (C) to show-
er arm (D) turning clockwise to
tighten.
13) Attach large end of hand show-
er hose (W) to hand shower (U).
Connect in-line vacuum breaker
to wall elbow (B). Turn clock-
wise to tighten.
1
2
B
1
2
P
4
3
P
O
N
2
1
3
1
4
2
W
U
A
W
B
1
2
C
D
1
2
D
E
1
3
2
P