Installation Guide

5
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3059 REV 0 06/16/2014
Option: Place cradle mounting
plate (Q) in position, mark and drill
3/16" holes into wall. Install anchors.
9) Remove cover of hand shower
cradle (O) . Install cradle and
mounting plate (Q) . Secure with
three screws (P) . Replace cover
on hand shower cradle.
10) Attach shower arm (D) and
ange (E) to vertical shower pipe
turning clockwise to tighten.
11) Install showerhead (C) to shower
arm (D) turning clockwise to
tighten.
12) Attach large end of hand
shower hose (U) to hand
shower (S). Attach small end
of hand shower hose (U) and
gasket to in-line vacuum
breaker (A). Connect in-line
vacuum breaker to wall
elbow (B). Turn clockwise
to tighten.
4
3
Q
P
O
2
1
3
1
4
2
U
S
A
U
B
1
2
C
D
1
2
D
E
1
3
2
Q