Installation Guide

4
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3059 REV 0 06/16/2014
Note:
For valve body installation, please
see valve body installation guides.
1) Install shower escutcheon (R) to
shower valve. Secure with two
screws (M).
2) Attach mounting plate (N) to
diverter valve (4505 and 4506
only). Secure with two screws (M).
3) Attach diverter escutcheon (L) to
plastic mounting plate (N).
Note: Tabs should snap into place.
4) Install dome covers (K) to valves
and secure with lock nuts (J).
5) Install handles (H) to valves and
secure with screws (F) and star
washers (I). Attach plug
button (G) to handle.
Note: Handles should be facing the
6 o'clock position.
6) Install tub spout (T) to pipe tting.
Turn clockwise to secure.
7) Install wall elbow (B) to stub out
pipe. Tighten Allen screw (3 mm)
to secure.
8) Place cradle mounting plate (Q) in
position, mark and drill 1/8" pilot
holes into stud.
1
2
M
R
1
2
N
M
1
2
T
1
2
B
1
2
Q
1
1
2
K
J
K
J
1
1
2
3
F
I
H
I
H
G
F
L
N