Installation Guide

433RH, 433TB-18, 433TB-24, 433TP, 433TR

Sereno

™

Accessories

Operation & Maintenance Manual

Model Numbers Speciﬁcations

433RH Robe Hook

433TB-18 18" Towel Bar

433TB-24 24" Towel Bar

433TP Toilet Paper Holder

433TR Towel Ring

All premium accessories made from brass plated in

standard polished chrome nish.

Modiﬁcations Warranty

-STN Satin nickel ﬁnish

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Note: Append appropriate -sufx to model number.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621

■

www.symmons.com

■

gethelp@symmons.com

■

ZV-3093 REV 0 09/22/14

PAGE 1
433RH, 433TB-18, 433TB-24, 433TP, 433TR Sereno™ Accessories Operation & Maintenance Manual Model Numbers Specifications 433RH Robe Hook 433TB-18 18" Towel Bar 433TB-24 24" Towel Bar 433TP Toilet Paper Holder All premium accessories made from brass plated in standard polished chrome finish. 433TR Towel Ring Modifications -STN Warranty Satin nickel finish Limited Lifetime - to the original end purchaser in consumer installations. 5 Years - for commercial installations. Refer to www.symmons.
PAGE 2
Dimensions 433TR 433RH Measurements F D B E A C 433TP G H I 433TB-18 J L M K A 2 3/8", 60 mm B 2 5/8", 67 mm C 2 5/8", 67 mm D 8 1/4", 210 mm E 5 5/8", 143 mm F 2 5/8", 67 mm G 7", 178 mm H 3 1/8", 79 mm I 4 1/8", 105 mm J 20", 508 mm K 22 3/4", 578 mm L 2 5/8", 67 mm M 2 5/8", 67 mm N 26", 660 mm O 28 3/4", 730 mm Required for Installation 433TB-24 Phillips head screwdriver N L O M Power drill Note: Dimensions are subject to change without notice.
PAGE 3
Installation 1) Measure and mark centerlines for mounting bracket installation using dimensions on page 2. 2b) Stud Option: Place mounting brackets into desired position. Using brackets as a guide, carefully drill 3/16" holes into wall. 4) Hang top of accessory on mounting bracket. Lower into position. 1 1 2 Notes: 433TB-18 and 433TB-24 only. Make sure both centerline marks are level. 3) With mounting brackets in position, secure to wall using screws.