Use and Care Manual

9-5/8"
(243 mm)
nished wall
Floor
hot / cold
supply
showerhead
supply
5/8" (16 mm)
4"
(102 mm)
2-5/8"
(67 mm)
12"
(305 mm)
7-1/2" square
(191 mm)
tub spout
supply
1/2"-14 NPT
1/2"-14 NPT
mounting plate,
*
Notes (1)(2)
Temptrol
control valve
46-2-BODY
approx
45"
(1143 mm)
approx
32"
(813 mm)
*
Notes:
(1) Valve spindle can be extended
through walls greater than 1/2 inch
by removing valve mounting plate.
(2) Dimension applies when valve mounting plate
is not used. See installation instructions for details.
(3) Do not install positive shut-off devices or devices that do not
allow the valve to ow at least 1.5 gpm on control valve outlets.
(4) Dimensions subject to change without notice.
HOT
supply
COLD
supply
Wall thickness with valve
mounting plate installed
1/16" (2 mm) min
1/2" (13 mm) max
5-1/2"
(141mm)
2"
±
1/4"
(51 mm
±
6 mm)
pipe centerline
to nished wall
*
Note (2)
1/2"
(13 mm)
Dimensions Oxford Tub-Shower System, 4202
Symmons Industries, Inc. 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone], [phone] ■ Fax: [phone]
©2011 Symmons Industries, Inc. Printed in U.S.A. ■ www.symmons.com ■ [e-mail] ■ ZV-612 ■ 110911