Installation Guide

ManualsBrandsSymmons ManualsBathNaru 2-Handle Shower Faucet in Chrome (Valve Not Included)

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621

■

www.symmons.com

■

gethelp@symmons.com

■

ZV-3050 REV 0 09/02/14

4100-TRM, 4101-TRM

Naru

™

Trim Series

Operation & Maintenance Manual

Model Numbers Speciﬁcations

4100-TRM Valve Trim

4101-TRM Shower Trim

Shower trim includes shower escutcheon kit and 3 mode

showerhead with standard 2.5 gpm (9.5 L/min) ow

restrictor. Valve trim includes shower escutcheon kit only.

Components made from metal and nonmetallic materials

plated in standard polished chrome nish.

Modiﬁcations Compliance

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

-2.0 2.0 gpm (7.6 L/min) ﬂow restrictor

-412HSB 30" slide bar in place of wall cradle on

hand shower units

-PNL Polished nickel ﬁnish

-STN Satin nickel ﬁnish

-ASME A112.18.1; CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Note: Append appropriate -sufx to model number.

Summary of content (4 pages)

PAGE 1
4100-TRM, 4101-TRM Naru™ Trim Series Operation & Maintenance Manual Model Numbers Specifications 4100-TRM Valve Trim 4101-TRM Shower Trim Modifications Shower trim includes shower escutcheon kit and 3 mode showerhead with standard 2.5 gpm (9.5 L/min) flow restrictor. Valve trim includes shower escutcheon kit only. Components made from metal and nonmetallic materials plated in standard polished chrome finish. Compliance -1.5 1.5 gpm (5.7 L/min) flow restrictor -2.0 2.0 gpm (7.
PAGE 2
Dimensions Measurements A C B E F A Ø 2 1/4", 57 mm B 4 7/8", 124 mm C 8 1/4", 210 mm D Ø 7 1/2", 191 mm E 77", 1956 mm F 3 1/2", 89 mm G 42", 1067 mm H 2 1/4", 57 mm I 3", 76 mm J (Rough in) 2 3/8" ± 1/2", 60 mm ± 13 mm D H G I J Floor Notes: 1) All dimensions measured from nominal rough-in (see J as reference). 2) Dimensions are subject to change without notice. 2 Symmons Industries, Inc.
PAGE 3
Parts Breakdown Replacement Parts B C A D H I F Description Part Number A Showerhead 412SH B C Flange Shower Arm 300 D I Handle Set Screw T-567 E Dome Cover T-544 F G H Shower Escutcheon Mounting Screws Mounting Plate T-273-NS-K002 Note: 1) Append -PNL to part number for polished nickel finish; -STN for satin nickel. G E Item 2) Append -1.5 or -2.0 to showerhead for low flow.
PAGE 4
Installation Note: For valve body installation, please see valve body installation guide. 3) Install dome cover (E) to valve by turning clockwise. 5) Attach shower arm (C) and flange (B) to vertical shower pipe turning clockwise to tighten. 1 1) Install large plastic mounting plate (H) to shower valve (4000-BODY). Secure with two screws (G). 1 2 H B C E 1 2 2 G 4) Install shower handle (D) to valve. Secure handle by tightening set screw (I).